SAVE 5% with code "SUMMER2021"

SEMCO Fabric Reinforcement
Fabric Reinforcement - semcoworks
Fabric Reinforcement - semcoworks
1

About

The SEMCO Fabric Reinforcement adds strength to load-bearing waterproofing membranes specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.
  • Required for use with SEMCO Liquid Membrane in coves, corner and changes of plain for waterproofing applications
  • Can be used with SEMCO Liquid Membrane for added strength
  • Interior and exterior use
  • Vertical and horizontal surfaces (including ceilings)
  • Provides added strength to installation areas with added stress

FAQ

When is the Fabric Reinforcement recommended?

The Fabric Reinforcement is recommended on any substrate that has seams or joints. On substrates that consist of different elements/boards, the weak point are the seams where most of the movement can occur.

Is the Fabric Reinforcement visible?

Yes, the Fabric Reinforcement fabric will be visible if you intent to use the SEMCO Liquid Membrane as a finish coat.

Bridging cracks with the Fabric Reinforcement

Any cracks larger than 1/4" we recommend to use the Fabric Reinforcement. The Fabric Reinforcement will bridge the existing cracks and prevents them to transfer into your surface.

How to apply Fabric Reinforcement

Apply a coat of SEMCO Liquid Membrane over the area where you would to apply the Reinforcement Fabric. While the SEMCO Liquid Membrane is still wet, apply the Fabric Reinforcement over the area and press it flat. After 5 - 10 minutes roll another coat of the SEMCO Liquid Membrane over the Fabric Reinforcement and let it dry for 45 minutes to an hour before applying the SEMCO Liquid Membrane over the entire surface.

The SEMCO Fabric Reinforcement adds strength to load-bearing waterproofing membranes specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide.

  • Required for use with SEMCO Liquid Membrane in coves, corner and changes of plain for waterproofing applications
  • Can be used with SEMCO Liquid Membrane for added strength
  • Interior and exterior use
  • Vertical and horizontal surfaces (including ceilings)
  • Provides added strength to installation areas with added stress


Fabric Reinforcement

Regular price
Sold out
Sale price
$52.32
Quantity must be 1 or more

SEMCO

1

About

The SEMCO Fabric Reinforcement adds strength to load-bearing waterproofing membranes specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.
  • Required for use with SEMCO Liquid Membrane in coves, corner and changes of plain for waterproofing applications
  • Can be used with SEMCO Liquid Membrane for added strength
  • Interior and exterior use
  • Vertical and horizontal surfaces (including ceilings)
  • Provides added strength to installation areas with added stress

FAQ

When is the Fabric Reinforcement recommended?

The Fabric Reinforcement is recommended on any substrate that has seams or joints. On substrates that consist of different elements/boards, the weak point are the seams where most of the movement can occur.

Is the Fabric Reinforcement visible?

Yes, the Fabric Reinforcement fabric will be visible if you intent to use the SEMCO Liquid Membrane as a finish coat.

Bridging cracks with the Fabric Reinforcement

Any cracks larger than 1/4" we recommend to use the Fabric Reinforcement. The Fabric Reinforcement will bridge the existing cracks and prevents them to transfer into your surface.

How to apply Fabric Reinforcement

Apply a coat of SEMCO Liquid Membrane over the area where you would to apply the Reinforcement Fabric. While the SEMCO Liquid Membrane is still wet, apply the Fabric Reinforcement over the area and press it flat. After 5 - 10 minutes roll another coat of the SEMCO Liquid Membrane over the Fabric Reinforcement and let it dry for 45 minutes to an hour before applying the SEMCO Liquid Membrane over the entire surface.

The SEMCO Fabric Reinforcement adds strength to load-bearing waterproofing membranes specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide.

  • Required for use with SEMCO Liquid Membrane in coves, corner and changes of plain for waterproofing applications
  • Can be used with SEMCO Liquid Membrane for added strength
  • Interior and exterior use
  • Vertical and horizontal surfaces (including ceilings)
  • Provides added strength to installation areas with added stress