1
![industrial traffic surfaces, high foot traffic areas, driveways and walkways]()
About
The Titan Shield Gloss is an advanced single component water-based polyurethane hybrid sealer. The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, and/or polished concrete.
- WITHSTANDS COMMERCIAL AND INDUSTRIAL VEHICLE TRAFFIC
- REJUVINATES COLOR AND LEAVES NATURAL LOOK
- INTERIOR AND EXTERIOR USE
Specs
- Ready to use single component water-based polyurethane hybrid sealer
- Coverage : 150 - 200 sq ft /gallon @ 3 coats
- Easy to apply : with 1/2" woven nap roller,Airless Sprayer or Magic Trowel
- Recommended For: Concrete, Driveways and Garages, Masonry, Stamped Concrete, Pool Decks, Wood, Wet rooms, Interior&Exterior Areas
FAQ
Why Titan Shield?
The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, wood and/or polished concrete.
What is the coverage per gallon?
Titan Shield has a coverage of approx 150-200 sq ft per gallon at 3 coats @20 mil total thickness. The coverage may slightly vary depending on porosity of your surface.
Does Titan Shield come in colors?
- Clear/Transparent
- Rockslide Grey
- Monday Grey
- White
- Brown Slate
- Sequoia Brown
- Black Pearl
- Honey Maple
- Sandy Beige
How can Titan Shield be applied?
Preparation
Concrete, Cement, Block, Pavers, Synthetic Wood
Application
Apply the Titan Shield Gloss with a woven 1/2” nap roller and use Magic trowel to spread it evenly. Start from top to bottom. Minimum of 3 coats is required. Use HVLP with a large tip size 17 to apply Titan Shield Gloss on large surface areas.
Concrete, Cement, Block, Pavers, Synthetic Wood
Use SEMCO Nu-Lift Cleaner and Stone Soap to remove any mineral deposits or efflorescence • If there is any oil or grease, use SEMCO Power Cleaner and Nu-Lift Cleaner to strip surface of any oil or grease
Application
Apply the Titan Shield Gloss with a woven 1/2” nap roller and use Magic trowel to spread it evenly. Start from top to bottom. Minimum of 3 coats is required. Use HVLP with a large tip size 17 to apply Titan Shield Gloss on large surface areas.
My concrete already has a sealer on it, I don’t know what it is, but its still on there, can your product stick to it?
The Titan Shield best substrate for application is an unsealed surface, it has good adhesion properties and can stick to an existing Water-Based sealer, however if you are uncertain if it is water-based or if there was a solvent based curing compound used I would remove the existing finish in its entirety prior to proceeding the Titan Shield as we guarantee its performance as a sealer but cannot warrant its ability to adhere to an existing coating or sealer.
The Titan Shield Gloss is an advanced single component water-based polyurethane hybrid sealer. The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, and/or polished concrete.
Titan Shield Gloss
- Regular price
- $65.10
- Sale price
- $65.10
📦Free Shipping on orders over $100
PROTECT WITH CONFIDENCE
The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, wood and/or polished concrete.
- Withstands commercial or industrial vehicle traffic
- Rejuvenates color and leaves natural look
- For Interior and exterior applications
- Quick drying system allows 3 coat application in a single day
- Easy application with roller, Magic Trowel or airless sprayer
- 5 year standard limited warranty, 10 year for non-traffic surfaces
1
About
The Titan Shield Gloss is an advanced single component water-based polyurethane hybrid sealer. The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, and/or polished concrete.
- WITHSTANDS COMMERCIAL AND INDUSTRIAL VEHICLE TRAFFIC
- REJUVINATES COLOR AND LEAVES NATURAL LOOK
- INTERIOR AND EXTERIOR USE
Specs
- Ready to use single component water-based polyurethane hybrid sealer
- Coverage : 150 - 200 sq ft /gallon @ 3 coats
- Easy to apply : with 1/2" woven nap roller,Airless Sprayer or Magic Trowel
- Recommended For: Concrete, Driveways and Garages, Masonry, Stamped Concrete, Pool Decks, Wood, Wet rooms, Interior&Exterior Areas
FAQ
Why Titan Shield?
The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, wood and/or polished concrete.
What is the coverage per gallon?
Titan Shield has a coverage of approx 150-200 sq ft per gallon at 3 coats @20 mil total thickness. The coverage may slightly vary depending on porosity of your surface.
Does Titan Shield come in colors?
- Clear/Transparent
- Rockslide Grey
- Monday Grey
- White
- Brown Slate
- Sequoia Brown
- Black Pearl
- Honey Maple
- Sandy Beige
How can Titan Shield be applied?
Preparation
Concrete, Cement, Block, Pavers, Synthetic Wood
Application
Apply the Titan Shield Gloss with a woven 1/2” nap roller and use Magic trowel to spread it evenly. Start from top to bottom. Minimum of 3 coats is required. Use HVLP with a large tip size 17 to apply Titan Shield Gloss on large surface areas.
Concrete, Cement, Block, Pavers, Synthetic Wood
Use SEMCO Nu-Lift Cleaner and Stone Soap to remove any mineral deposits or efflorescence • If there is any oil or grease, use SEMCO Power Cleaner and Nu-Lift Cleaner to strip surface of any oil or grease
Application
Apply the Titan Shield Gloss with a woven 1/2” nap roller and use Magic trowel to spread it evenly. Start from top to bottom. Minimum of 3 coats is required. Use HVLP with a large tip size 17 to apply Titan Shield Gloss on large surface areas.
My concrete already has a sealer on it, I don’t know what it is, but its still on there, can your product stick to it?
The Titan Shield best substrate for application is an unsealed surface, it has good adhesion properties and can stick to an existing Water-Based sealer, however if you are uncertain if it is water-based or if there was a solvent based curing compound used I would remove the existing finish in its entirety prior to proceeding the Titan Shield as we guarantee its performance as a sealer but cannot warrant its ability to adhere to an existing coating or sealer.
The Titan Shield Gloss is an advanced single component water-based polyurethane hybrid sealer. The perfect sealer solution for cementitious surfaces such as concrete, micro toppings, pavers, block, and/or polished concrete.